Description

Set, Exhaust Chamber, Stainless Steel, TZM150R

The TYGA Performance TZM150R pipe is just what is needed to unleash the power suffocated by the stock system. Just by changing the exhaust system huge gains in torque can be made and it is designed for quick and easy fitting with no re-positioning of bodywork.

The TZM150R already has an impressive top end performance, so our first aim was to increase the midrange torque for punch out of corners and seamless acceleration. This improvement can be clearly seen in the dyno graph.

Cosmetically, the TYGA chamber is a big improvement over the standard bulky looking chamber, and as an added bonus there is also a massive weight saving compared to the standard chamber.

When ordering a complete system for your TZM150R.

A) 1 x chamber set (EXCS-0055).

When you order this, you will receive included in the chamber set:

• 1 x Chamber
• 1 x Manifold with integrated spring hooks
• 2 x Manifold washers (Used on the M8 studs before the M8 nuts)
• 2 x Exhaust springs
• 1 x Frame mounting hardware
• 1 x Silencer clamp
• 1 x Silencer clamp mounting hardware
• 1 x Cable Tie, 150mm (Use to manage the breather hoses)

Not included in this product is the silencer.

B) Please order your choice of silencer separately as shown below:

• 1 x EXSL-0001
• 1 x EXSL-0002
• 1 x EXSL-0003
• 1 x EXSL-0004
• 1 x EXSL-0065
• 1 x EXSL-0066
• 1 x EXSL-0067
• 1 x EXSL-9005
• 1 x EXSL-0103
• 1 x EXSL-0104

Each silencer is provided with hardware for mounting to the chamber and the silencer with the badge on the correct side.