10-2019 Marco's Aprilia RS250
Marco's Aprilia RS250 (Carbon Bodywork)
| Owner: | Marco |
| Country: | Germany |
| Motorcycle Model: | Aprilia RS250 |
| Award Winner: | 10/2019 |
For our Customer Bike of the month October 2019 we have chosen Marco’s Aprilia RS250
Marco who is from Germany put a lot of time and effort restoring his Aprilia RS250 and went for the TYGA-Performance GP bodywork in full carbon.
The project started with a Silver Romboni.
The list of things Marco changed/restored/upgraded on his bike is impressive:
- All rolling chassis parts were lacquered professionally soft.
- Frame, swingarm, rims and calipers in Gray Black tiger powdered.
- Motor cover slide cover, chain tensioner and shock absorber deflection in royal blue powdered silk.
- Fuel tank, oil and water tank from the model from 1998.
- All bearings renewed (wheel bearings, steering head bearings, swingarm bearings, suspension strut deflection)
- Wheel axles, swingarm axle and locknuts browned.
- Pulleys black burnished.
- Various Phillips screws in the engine swapped for titanium Allen.
- Tyga Sichtcarbon Street Front and Heckverkleidung incl carbon license plate carrier.
- New mirrors.
- Tyga carbon front and rear fender.
- Tyga carbon sprocket cover.
- Tyga Carbon Radiator Mount.
- Tyga Rear set Aluminum milled with carbon heel guards and aluminum shift linkage.
- Tyga antler and rear frame.
- Tyga sprocket aluminum blue anodized with titanium bolts and ProBolt aluminum nuts red.
- Motoscope per speedometer with carbon holder.
- Domino short-stroke throttle grip including new grip rubbers.
- Upper fork bridge milled aluminum.
- New fork service (new progressive spring, oil seals, oil)
- Strut service.
- New tires Bridgestone s21
- Performance Parts Aluminum stub with cnc milled holders.
- Cnc milled aluminum kickstand.
- Afam 3d Racing Chain + Pinion
- Jim lomas stainless steel system with classic carbon mufflers and carbon retainer.
- Kellermann bl 2000 handlebar end indicator.
- Kellermann atto rear turn signal.
- Kellermann turn signal relay.
- Titan engine retaining bolts.
- Titanium cylinder head nuts.
- Titanium brake discs v / h
- Titan engine cover screws.
- Various other titanium bolts and nuts.
- Various aluminum nuts and bolts (ProBolt)
- All cladding screws ProBolt aluminum blue.
- Aluminum fuel tank cap black / blue anodized with aluminum screws.
- New clutch friction discs including aluminum washers stronger springs, titanium clutch basket screws with titanium discs and an angry release lever.
- Melvin steel flex blue with red fittings and blue banjo bolts.
- Stahlbus brake bleeder valves.
- New brembo sinter pads front and rear
- Calipers newly sealed.
- Milled aluminum angle valves.
- Aluminum bobbins.
- Electrics minimized.
- JMT lithium battery.
- Silicone radiator hoses blue.
- All liquids new.
- New regulator with greater cooling capacity.
- The complete forester all around carefree package incl invoice consisting of:
- Complete engine overhaul
- Crankshaft finely balanced to 0,00mm
- Forester cylinder heads
- New pistons
- Overflow adapted
- Changed tax times
- Reinforced slides
- Carburettor adapted.
- Completely new stored, sealed and pressed.
- Expected power stable 75 hp (not yet retracted and fine-tuned, but runs like a clockwork)
- The vehicle weighs ready to go Fully fueled, oil and water maximum 132 kg!
Products used on this bike
For all TYGA-Performance products for the Aprilia RS250 click here.
